Ezyscribe - Your Pre-cut Scriber Solution
To Order Ezyscribe Pre-cut Scriber:
We are a wholesale manufacturer of Scriber only - all Sales are to be directed through your timber merchant.
If you are a timber merchant wanting to source scriber products, please order our scriber products through Southern Pine Products, as below.
Southern Pine Products Contacts in Christchurch:
P.O Box 16-200 Christchurch
635 Halswell Junction Road
TEL: (03) 349 9175
Southern Pine Products Contacts in Auckland:
Unit 8/99 Carbine Road
Mt Wellington, Auckland 1060
TEL: (09) 573 0484
It's time to consider the dramatic improvements in efficiency that come with using Ezyscribe Pre-cut Scriber!
With Ezyscribe Scriber, we have taken away all of the fussing around that comes with having to cut your own Scriber when installing weather board on new or existing buildings . On average you would spend 1.5 hours cutting and fitting Scriber around a window. With Ezyscribe it would only be 10 minutes. Even better, you can use our Pre-cut Scriber as a storey rod, making installation of weatherboards easy.
Ezyscribe Scriber is available across a wide range of fittings to suit all weatherboards.
We produce Scriber in pre-primed finger jointed pine.
Standard Pre-cut Scribers (Radiata H3.1 Treated and Pre-Primed):
Sizes: 40x10mm and 40x18mm (60x18mm is available by special order)
Length: 5.4 metres
For the following weatherboards:
135x19mm Standard Bevelback (103mm cover)
142x19mm Standard Bevelback (110mm cover)
180x19mm Standard Bevelback (148mm cover)
187x19mm Standard Bevelback (155mm cover)
135x16mm Linea (105mm cover)
150x16mm Linea (120mm cover)
180x16mm Linea (150mm cover)
EZYScribe Wall 2.jpg